If your SmartMover will not startup – troubleshooting and solutions
What is going on? Your SmartMover will not startup, and it is an important part of your working day which you really do not want to do without. But you are lucky – we have already given you the solution to four typical reasons why the SmartMover will not startup.
You show up at the construction site, ready to get on with today’s work. But your SmartMover will not start up, and without it, you are facing a long day of heavy lifting and pushing around an unmanageable and old-fashioned brick trolley.
Unfortunately, it happens that machinery stops working unexpectedly. Sometimes all you need is a simple manoeuvre to get them started up again; other times it is a bit more tricky.
This is the case too with the SmartMover from Baron. But we know about the four most typical reasons why it will not start up, though. And luckily, we also know the solutions. If you ever experience one of the four problems mentioned below, we have the solution handy for you.
Remember to fully charge the battery
First and foremost is it important to point out that the battery must be charged before it is completely flat; when there is only one green indicator left on the battery, it must be charged. If the battery is used for so long that only the red indicator is on, there is the risk that you will not be able to charge the battery yourself. Then it must be sent in for service at us and depth charged.
This means that you must charge your battery every day when you leave the construction site. Short, frequent charges shorten the battery’s lifetime.
If you ever experience that a battery does not last an entire working day, because you manoeuvre on e.g. a loose surface or with a very heavy load, you can buy one or more extra batteries with advantage. That way you always have a fully charged battery handy.
- The battery does not click during start up
Try to connect your SmartMover battery to the charger for three seconds and then restart.
- The machine clicks during start-up but will not start (the electric brake is stuck)
Try to push-start the SmartMover by holding down the “throttle”, placing one leg on the footrest and pushing forward.
- The machine moves slowly
The switch to adjust the speed is defective, and you need to order a spare part.
- The battery does not charge / the charger lights up red for one second and then turns green again
The battery is either too hot or cold. The battery can only be charged between +3 and +40 degrees. As an alternative, the battery controller might be defective and needs repairment.
Now you have tried the four most typical reasons why your SmartMover battery will not startup. Does it still not work? Then please contact the hardware store, where the battery is bought – or just the hardware store nearest you – and they will help you find a solution.
If your SmartMover needs to be sent in for repairment, we render a fast service, of course, so you will not have to do without the SmartMover longer than necessary. In some cases, we can lend you a battery, while we take a look at yours.
And does this troubleshooting sound familiar? Well, take o look at your SmartMover. We have placed a sticker with the troubleshooting in front; right where you need it the most.
Do you know of all the accessories available for the SmartMover? If you want to save some time in your working day, this is a good place to start.